SD-WP31V

  |  Wall Plate Panels  |  Wall Plate HDBaseT Extenders  |  SD-WP31V

SD-WP31V

The SD-WP31V is a 3×1 Wallplate Transmitter Switcher, which is designed to switch and extend HDMI or VGA input signal to far-end display device, and the transmission distance is up to 131ft/40m at 4K and 229ft/70m at 1080P video by using a single CATx cable.

The switcher features two HDMI and one VGA inputs, it can be selected by the SOURCE AUTO button on the front panel.

Key Features

Supports HDMI signal up to [email protected] 4:2:0, VGA signal up to 1920×[email protected] Hz
HDMI 1.4 standard and HDCP 2.2 compliant. Ensures display of content-protected media and interoperability with other HDCP compliant devices
Supports VGA video resolution up-scaling, the VGA input video can be automatically upgraded to the default 1080P output
Extending HDMI signal [email protected] up to 131ft/40m and [email protected] up to 229ft/70m
Active input automatic detective
Extending HDMI signal [email protected] up to 131ft/40m and [email protected] up to 229ft/70m
Supports RS232 pass-through with HDBaseT connection and local control
Supports IR pass-through to extend IR signal to control display device
The DISPLAY ON/OFF button can be programmed by RS232 command
The HDBT port supports 24V-48V PoC input and compatible with 48V PoH, the switcher can be powered from the compatible HDBaseT receiver by the CATx cable, and it also supports 24V PoC output
Firmware upgrade by Micro-USB port.

Description

This Wall Plate Control Panel is one of the latest SEADA products for a total AV solution.

The SD-WP31V is the 3×1 Wallplate Transmitter Switcher, which is designed to switch and extend HDMI or VGA input signal to far-end display device, and the transmission distance is up to 131ft/40m at 4K and 229ft/70m at 1080P video by using a single CATx cable.

The switcher features two HDMI and one VGA inputs, it can be selected by the SOURCE AUTO button on the front panel. The switcher supports CEC. The DISPLAY ON/OFF button on front panel is used to control the far-end display device, and it can be programmed by RS232 command to ensure the compatibility with various display devices. Moreover, 24V-48V PoC allows the switcher can be powered from the compatible HDBaseT receiver.

Specifications

INPUT(2) HDMI, (1) VGA, (1) AUDIO
INPUT CONNECTOR(2) FEMALE TYPE A HDMI

(1) FEMALE VGA (15-PIN)

(1) 3.5MM MINI JACK

HDMI INPUT RESOLUTIONUP TO 4K/[email protected] 4:2:0
VGA INPUT RESOLUTIONUP TO 1920×[email protected] HZ
AUDIO INPUT IMPEDANCE>10KΩ
FREQUENCY RESPONSE20HZ~20KHZ
SNR>[email protected]~20KHZ
OUTPUT
OUTPUT(1) HDBT OUT
OUTPUT CONNECTOR(1) RJ45
HDBT OUTPUT RESOLUTIONUP TO 4K/[email protected] 4:2:0
CONTROL
CONTROL PORTS(1) IR, (1) FIRMWARE, (1) RS232, (1) IR IN
CONTROL CONNECTOR(1) BUILT-IN IR SENSOR

(1) MICRO-USB

(2) 3-PIN TERMINAL BLOCK

GENERAL
BANDWIDTH10.2GBPS
TRANSMISSIONHDBASET
HDMI VERSION1.4
HDCP VERSION2.2
TRANSMISSION DISTANCE[email protected]≤40M, [email protected]≤70M
EXTERNAL POWER SUPPLYINPUT:100V~240V AC; OUTPUT: 24VDC 1.25A
POWER CONSUMPSION5W MAX. (SD-WP31C ONLY – ADD EXTRA FOR HDBASET RECEIVER)
OPERATION TEMPERATURE-10 ~ +40℃
STORAGE TEMPERATURE-15 ~ +55℃
RELATIVE HUMDITY10% ~ 90%
DIMENSIONS (W*H*D)SD-WP31V-EU: 151MM X 80MM X 39MM

SD-WP31V-UK: 146MM X 86MM X 39MM

NET WEIGHT245G

Datasheets